Alarm Lock ETPLN Betriebsanweisung PDF herunterladen (Seite 60)

60 DL-WINDOWS™ for Trilogy Networx™ V4.0 USER'S GUIDE

Right-Click Profile Menu > Take Lock out of Passage

Access this menu by first selecting a Profile in an Account. Accounts are

listed the white box area (the Account Tree area) at the left side of the DL-

Windows main screen (click the small "+" sign next to the Account name, and all

Profiles in the Account appear).

Double-click the padlock icon representing a Profile. The Lock Data screen

opens and a green arrow appears next to the Profile. Click the green arrow to

select the Profile (a blue highlight box appears around the Profile name). Right-

click the Profile to open the right-click menu shown at left.

IMPORTANT: If the selected wireless physical lock is in…

● Emergency Passage mode (see page 52)

--or in--

● Emergency Lock Down mode (see page 51)

...the selected wireless physical lock MUST be taken out of

its Emergency mode before either the Take Lock out of

Passage or the Put Lock into Passage command will op-

erate.

In addition, when a lock is in an "Emergency" state, all

User Codes are disabled at the keypad except for User

Code #1 (the Master Code) and User Codes 2 through 9.

Take Lock out of Passage

Put Lock into Passage

Click either option and the bottom of the DL-Windows main

screen displays real-time operational text, including "Sending

Passage command to Gateway…" and other text messages.

The Lock Status dialog automatically opens:

The image at right displays an example of the Lock Status

screen after a Put Lock into Passage command is sent.

Unable to verify all locks

Note: If some or all locks in the Gateway cannot be con-

firmed as unlocked via the wireless signal, the Status col-

umn turns yellow, reading "Unable to verify all locks".

Although these physical locks may indeed be unlocked, to

view the locks that are unable to be wirelessly verified as

unlocked, proceed as follows:

Right-Click Profile Menu > Put Lock into Passage

What is "Passage"?

"Passage" means to "unlock" the physical lock, allowing "passage" through

the door.

● Take Lock out of Passage = "Securing" the lock

● Put Lock into Passage = "Unlocking" the lock

1. Click the GW Confg button to open the Gateway

Configuration screen.

2. Click to highlight a specific Gateway in the list.

3. Click Tools, View Gateway's Lock Table. The Lock

Status column clearly indicates which lock(s) are un-

verifiable.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 66 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

Alarm Lock ETPLN Betriebsanweisung Seite 60

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Alarm Lock ETPLN