Alarm Lock DL6100 Bedienerhandbuch

1 Wireless Trilogy® DL6100 Programming Instructions WI1820A 3/11 345 Bayview Avenue Amityville, New York 11701 For Sales and Repairs 1-800-ALA-LOCK

10 WIRING See the Installation Manual for more information. Batteries: Use four 1.5 volt Alkaline size-C batteries only. External Power: Red / Black

11 Quick Start First Time Start Up 1. Unpack the lock. 2. With the batteries disconnected, hold down the ; key for 10 seconds and release. 3. C

12 Quick Start (cont’d) (For example, John Smith is designated as User 21. You want him to use the code of "232323" to unlock the door

13 Verifying Basic Keypad User Codes Test a valid User Code: VALID CODE - The Green LED will flash momentarily and the sounder will beep a few times

14 Function 1 Change Master Code See page 15 Function 2 Add/Delete/Change User Codes See page 15 Function 3 User Disable (By User Number) See page

15 Lock Defaults for DL6100 Users added will default to a Group Association and a Programming Level ability as follows: USER TYPE USER NUMBER GROUP D

16 USERS (Continued) ; 6 : 6. Enable Total User Lockout Mode (This Function enabled through keypad only) 7. Disable Total User Lockout Mode (This Fun

17 ; 1 2 ; 0 0 0 : 12. Clear All Schedules and Timeout Functions Function 12 clears all programmed Schedules and all Timeout Functions. (To cle

18 GROUPS Group Enable/Disable with Timeout (Enter Timeout, XXX Hours) (Functions 25-34 are enabled through the keypad only) • Hours must be between 0

19 ; 3 8 ; [ _ _ _ _ _ _ ] : (Date) 38. Set Date • Use Month Day Year format - MMDDYY - Single digit months and days are entered with a preced

2 Table of Contents Lock Features ...3 Supported Products ...

20 ; 4 5 : 45. Enable Passage Mode (This Function enabled through keypad only) ; 4 6 : 46. Disable Passage Mode (This Function enabled through keypad

21 49. Disable Permanent Passage Mode (This Function enabled through keypad only) 50. Return Lock to Normal Passage Mode Schedule (This Function enabl

22 60. Number of Attempts Before Lockout 61. Set the Attempts Lockout Time • Number of attempts before lockout must be 1-9 attempts. • The number of

23 ; 6 7 ; [ _ _ ] : (Event Number) 67. Add System Features SYSTEM FEATURES 68. Delete All Relay Features added by Function 67. ; 6 8 ;

24 Scheduled Passage and Group Use the functions below to enable Passage Mode and enable/disable Groups at the time programmed. • For day enter: 1 for

25 QUICK SCHEDULES 84. Business Quick Schedule 7AM-5PM, Monday - Friday (This Function enabled through keypad only) ; 8 4 ; [ _ ] : (Group) 85.

26 To Disarm a Burglary Control Panel 90. Relay Activation (Open Time Window) ; 9 0 ; [ _ ] ; [ _ _ _ _ ] :

27 ; 9 9 ; 0 0 0 : 99. Clear All Lock Programming (This Function enabled through keypad only) Clears all programming, and returns lock to factor

28 Groups and Scheduled Group 1 Examples The following examples detail the more advanced features of the DL6100 series locks. Although all features

29 Groups and Scheduled Group 1 Examples (cont'd.) Functions 90/91: Use Function 90 and 91 (see page 26) to create a window of time where if any

3 Audit Trail • 40,000 Event Capacity* • Entries Logged with Time and Date • Critical Programming Events Logged • Uploadable using Alarm Lock's D

30 Function Number(s) Function Name Programming 43/44 Clock Adjust 52/53/54 Pass Time (3 sec)  10 sec  15 sec  60 Set Locko

31 User Number (1-5000) User Code (3-6 digits) User Name 1 2 3 4

32 User Number (1-5000) User Code (3-6 digits) User Name 1 2 3 4

33 Day(s) Function Number Up to 500 scheduled functions can be programmed. For Day Enter : 1 = Sunday, 2 = Monday, 3 = Tuesday, 4 = Wednesd

34 Day(s) Function Number Up to 500 scheduled functions can be programmed. For Day Enter : 1 = Sunday, 2 = Monday, 3 = Tuesday, 4 = Wednesd

35 ACCESS = Entry into a restricted area. AMBUSH = A special Code entered at the keypad when the User is forced to unlock a security device. The dev

36 number of invalid User Code entries (1-9). LOG = See... AUDIT TRAIL. MANAGER = See... CODE, MANAGER CODE. MASTER = See... CODE, MASTER CODE. PASSAG

4 Supported Products AL-IM SERIES WI-FI Gateway Module The DL6100 contains a radio that transmits and receives data--via a private wireless signal--to

5 Lock Design Overview Why use User Codes? With ordinary door locks, the need to make physical copies of metal keys and distributing them can be a hug

6 Terminology Used in this Manual What is a Lock Program? A Lock Program contains the instructions that the lock uses to perform its various functions

7 thought of as simply a numbered list from 1 through 5000. Each entry in the list is represented by a User Number. Therefore, where a User is locat

8 Lock Defaults for DL6100 Users added will default to a Group Association and a Programming Level ability as follows: USER TYPE USER NUMBER GROUP DE

9 Programming Key Sequence. Programming Information General Program Mode Information If a wrong key is pressed during code entry, press the ; key unt