Alarm Lock DL6500 Bedienerhandbuch PDF herunterladen

D. Insert the battery pack into inside housing as shown in

Fig. D.

E. Secure the battery cover to the "inside housing" with two

black 4-40 x ¼ flat head Phillips or spanner head secu-

rity screws as shown in Fig. E.

6. INSTALL INSIDE ASSEMBLY

A. See Fig. A. Before installing the black plastic "inside hous-

ing", apply dielectric grease (provided) into all of the plugs

and sockets that are described below. Connect the ribbon

cable plug into its socket located on the inside housing cir-

cuit board, then connect the Auxiliary Power, Remote Re-

lease, and External Relay Contact plugs into their respec-

tive sockets shown in Fig. A. Note: These plugs and sock-

ets fit only one way -- do not force any connections. Do not

allow wires to cross or lay on top of each other. Before

tightening any of the screws or bolts described below, jiggle

the ribbon cable and all other wiring to ensure wires are not

pinched.

B. Secure the top of the "inside housing" to the inside mount-

ing plate with two black 4-40 x ¼ flat head Phillips or

spanner head security screws. See Fig. B.

C. Connect the battery pack plug to the circuit board battery

plug as shown in Fig. C. Note that upon connection of the

battery pack, you will hear three beeps.

SUPPLEMENT to WI1004

PDL6500

DL6500

The Keyless, Electronic

Network Mortise Lockset

Supplement to WI1004

INSTALLATION

INSTRUCTIONS

The steps below supplement the WI1004 installation

instructions, continuing at step 6:

FIG. B: SECURE TOP OF INSIDE HOUSING

FIG. C: CONNECT THE BATTERY PLUGS

BATTERY PLUG FROM

CIRCUIT BOARD

PLUG FROM

BATTERY PACK

ALARM LOCK SYSTEMS, INC.

A division of the Napco Security Technologies, Inc.

345 Bayview Avenue

Amityville, New York 11701

For Sales and Repairs 1-800-ALA-LOCK

For Technical Service 1-800-645-9440

(Note: Technical Service is for locksmiths and alarm professionals only)

Publicly traded on NASDAQ Symbol: NSSC

FIG. D: INSERT BATTERY PACK INTO HOUSING ("SEALED" TYPE SHOWN)

continued

FIG. A: SOCKETS LOCATED IN THE INSIDE HOUSING

CIRCUIT BOARD

RIBBON CABLE

EXTERNAL

RELAY

CONTACTS

AUXILIARY POWER AND

REMOTE RELEASE

1 2 3 4

Inhaltsverzeichnis

Seite 1 - INSTRUCTIONS

1 D. Insert the battery pack into inside housing as shown in Fig. D. E. Secure the battery cover to the "insid

Seite 2 - WIRING AND POWER UP

2 WIRE CONNECTIONS WIRING AND POWER UP Note: See the lock programming instructions for additional programming inf

Seite 3 - OVERVIEW

3 Windows is a registered trademark of the Microsoft Corporation. Other products, product names and services described in this manual are for identi

Seite 4 - ALARM LOCK LIMITED WARRANTY

4 For every new wireless lock in-stalled on a door, we recom-mend that you fill out a new yel-low-colored "Lock ID Card" with the locatio

Weitere Dokumente für Sicherheitszugriffskontrollsysteme Alarm Lock DL6500

Um das Dokument anzuzeigen Alarm Lock DL6500 Bedienungsanleitung

Alarm Lock DL6500 Bedienungsanleitung (8 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Alarm Lock DL6500 Bedienerhandbuch

Stöbern Sie online oder laden Sie Bedienerhandbuch nach Sicherheitszugriffskontrollsysteme Alarm Lock DL6500 herunter. Alarm Lock DL6500 Programming instructions Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Sicherheitszugriffskontrollsysteme Alarm Lock DL6500

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Alarm Lock DL6500