Alarm Lock ETPLN Betriebsanweisung PDF herunterladen (Seite 27)

DL-WINDOWS™ for Trilogy Networx™ V4.0 USER'S GUIDE 27

"GW Confg" Button

Click the GW Confg button to open the Gateway Configuration screen.

The Gateway Configuration screen allows you to seek out new Gateway devices and add them to a

specific Account; similarly, locks can be discovered and added to Gateways.

Exit

Tools

View Gateway Status (see page 29)

View Gateway's Lock Table (see page 30)

Delete Locks by Serial Number (see page 31)

Link / Unlink Lock Profiles (see page 32)

Configure Network Settings (see page 33)

Ping Selected Gateway (see page 35)

Update Selected Gateway Firmware (see page 35)

Manually Add a Lock to the Selected Gateway (see page 36)

Send Lock Config Table to Selected Gateway (see page 37)

Send IP Table to Selected Gateway (see page 37)

Send IP Table to all Gateways (see page 37)

Import Assigned Lock From Gateway (see page 38)

Import Gateway and Assigned Locks (see page 38)

Select Network Adapter (see page 39)

Actions

Add Gateway to Account (see page 40)

Remove Gateway from Account (see page 41)

Locate All Locks on Gateway (see page 42)

Discover Locks on Selected Gateway (see page 43)

Discover New Gateways (see page 44)

Relocate Gateways (Displayed in red) (see page 45)

Replace Gateway with new one (see page 46)

Help

View Color Codes (see page 47)

Menu Bar

Text name of the Gateway, as specified when the Gateway

was added to DL-Windows using the Add Gateway to

Account screen (click Actions, Add Gateway to Account).

Description

Specifies the IP Address on the TCP/IP network currently

assigned to the Gateway. Required for communication.

IP Address

A unique serial number burned into Gateway memory that

identifies that Gateway from all others. Inside the Gateway

housing, the MAC address is located on a square sticker

(look under the bar code) and has 12 digits, grouped in 6

pairs separated by dashes.

MAC Address

Indicates the firmware source code edition currently residing

in the Gateway.

Firmware Version

Indicates the total number of locks assigned to the selected

Gateway's database.

Assigned Locks

Discover New Gateways and

Auto Add to Account

Number of Locks to Discover

Use both to add locks to a Gateway. First, click to select an

existing Gateway in the grid to which you want to assign the

installed locks, then select the number of locks the system

will try to find in the Number of Locks to Discover pull-

Discover Locks on Selected Gateway

This button combines two activities--the "discovery" process

and the "add to an Account" process--in one button. Be sure

the Gateway is mounted, powered and connected to the router

(or the network); be sure to press the "RESET" button on the

PC board before the Gateway housing cover is secured (go to

page 25 and follow the "Resetting the Gateway" instructions

for a "Partial Reset"). In DL-Windows, click this button and the

Discover New Gateways popup appears, shown below. The

Gateways that are found on the network are then automatically

added to the current Account and listed in the Gateway

Configuration screen grid.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

Alarm Lock ETPLN Betriebsanweisung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Alarm Lock ETPLN