Alarm Lock ETPLN Betriebsanweisung PDF herunterladen (Seite 35)

DL-WINDOWS™ for Trilogy Networx™ V4.0 USER'S GUIDE 35

Tools > Ping Selected Gateway

The Ping (Packet INternet Groper) network utility is used to test whether the IP address of the Gateway is available on the

network for immediate use. Ping sends a packet out on the network and waits for a response; the result of the ping is indi-

cated in the status bar located at the bottom of the Gateway Configuration screen. A successful test displays the IP ad-

dress of the Gateway with the word "Found"; an unsuccessful test displays "Not Found".

To open this screen, click the GW Confg button to open the Gateway Configuration screen. Click to

highlight a specific Gateway in the list, then click Tools, Ping Selected Gateway.

Tools > Update Selected Gateway Firmware

Allows the updating of the Gateway firmware.

The standard Windows Open dialog box appears (shown at

right), allowing you to browse for the binary ".bin" file con-

taining the firmware update.

Once the file is selected (highlighted), click Open to initiate

the update process.

Note: The image shown at right displays both lock firm-

ware and Gateway firmware ".bin" files in the same direc-

tory. Be sure the file selected in the File name field is of

the correct type before initiating the update process.

To open this screen, click the GW Confg button to open the Gateway Configuration screen. Click to

highlight a specific Gateway in the list, then click Tools, Update Selected Gateway Firmware.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 67 68

Keine Kommentare

Alarm Lock ETPLN Betriebsanweisung Seite 35