Alarm Lock Eagle 6000 Spezifikationen PDF herunterladen (Seite 35)

Eagle Research Corporation

REV 11.1.11 Page | 31

 System analysis using flow rate and pressure

 Support for estimating gas volume consumption in cases of meter or instrument

malfunction

Configuring Four Parameters for display

This feature allows the user to configure four parameters that can be shown at the

same time on the display. It is helpful when troubleshooting the unit. The parameters

must be configured before they can be displayed. To configure and display the four

parameters:

1. Move to the first parameter to be configured.

2. Press the jump key followed by the blue zero key. The RTU will display:

Select 1234 for

XX-XX-XX

Where XX-XX-XX is the address for the parameter.

3. Press the number 1, 2, 3 or 4 for the desired positioning of the parameter.

Position 1 XX.XX XX.XX Position 2

Position 3 XX.XX XX.XX Position 4

4. Move to the second, third, and fourth parameters and follow steps #2 and #3

above.

5. Press the decimal point key () while in configuration mode to display the values of

all

four parameters. Pressing the decimal point key () a second time will show the

address

for the four parameters.

6. Press the decimal point key () a third time to exit to configuration mode.

Special Key Combinations

There are a number of special key combinations that allow the user to view system

information and perform certain tasks very easily. They are listed in the table below.

Key Combination

Description

+/- and zero

System Passwords

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41

Keine Kommentare

Alarm Lock Eagle 6000 Spezifikationen Seite 35