Alarm Lock Eagle 6000 Spezifikationen PDF herunterladen (Seite 31)

Eagle Research Corporation

REV 11.1.11 Page | 27

OPERATING MODES

The XARTU/5 operates in any of the following four standard modes:

 Display

 Alarm

 Configuration

 Calibration

To access any operating mode, press the keypad key that corresponds to the mode you

want:

conf for configuration mode

alrm for alarm mode

cal for calibration mode

esc to return to a previous mode from any other mode

DISPLAY MODE

In display mode only limited parameters with assigned labels and function keys can be

viewed. The and arrow keys will allow you to scroll through the display parameter

list. You may use the jump key to directly view any of the assigned labels; press

jump, then enter the label number XXX, followed by pressing ent. You can use the

function keys (F0 - F9) to view previously assigned parameters. Talon software can be

used to assign function keys and labels to any parameter.

ALARM MODE

The RTU can be configured to activate an alarm when certain conditions are met, or

when user defined limits are exceeded. Active alarm messages can be configured for

display on the RTU's display. The unit can also automatically call a host computer

running Talon software to report an alarm. A history log is kept in the RTU on each

alarm condition, consisting of the following:

 Current value

 Type of alarm (high, low etc.)

 Setpoint value (alarm limit)

 Time of alarm

 Date of alarm

 Time out of alarm

 Date out of alarm

 Extreme value alarm

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 40 41

Keine Kommentare

Alarm Lock Eagle 6000 Spezifikationen Seite 31