Alarm Lock DL1300 Bedienerhandbuch PDF herunterladen (Seite 11)

Programming Functions (cont'd)

The DL1200 is capable of emitting 1 of 4 possible keypress sounds:

• High Frequency Keypad Feedback + Led

• Low Frequency Keypad Feedback + Led

• "Click!" Keypad Feedback + Led

• Led Only

[ __ __ __ __ __ ] ; 220 ;

Master Code**

High Freq KP Keypress Sound + Led

(Default)

Keypress Sound Options

[ __ __ __ __ __ ] ; 221 ;

Master Code**

Low Freq KP Keypress Sound + Led

[ __ __ __ __ __ ] ; 222 ;

Master Code**

Click! KP Keypress Sound + Led

[ __ __ __ __ __ ] ; 223 ;

Master Code**

Led Only

Disable/Enable Users in Bank

Enter Bank number (0-9) to Enable/Disable all Users in Bank. Entering a disabled Code will result in an

accented five beep error tone (indicating the User Access Code is valid but disabled).

Disable Users in Bank

[ __ __ __ __ __ ] ; 8 5 [ __ ] ;

Master/Manager Code** Bank Number

[ __ __ __ __ __ ] ; 8 4 [ __ ] ;

Master/Manager Code** Bank Number

Enable Users in Bank

When a key is pressed, a beep will sound and a Red LED will flash. Other indications are:

▪ Access Granted: 1 beep and a Green LED flash. (When Pass Time ends, the DL1200 locks with a beep and a

Red LED flash).

▪ Invalid Code Entered: 5 beeps and 5 Red LED flashes.

▪ Disabled Code Entered: 5 beeps (with extended first beep) and 5 Red LED flashes.

▪ New Access Code Accepted: 6 beeps and 6 Red LED flashes.

▪ Programming Error: 2 sets of 5 beeps and 5 Red LED flashes.

▪ Return from Anti Tamper Lockout: 2 beeps with a Red LED flash.

▪ Low Battery: High/Low sounder with flashing Red LED for 5 seconds. (See below to replace batteries).

Note: Keypress tones may be disabled using the ; 2 2 3 ; command (see Keypress Sound

Options, page 10).

Audible and LED Indications

** Required only if DL1200 is locked.

1 2 ... 6 7 8 9 10 11 12 13

Keine Kommentare

Alarm Lock DL1300 Bedienerhandbuch Seite 11