Alarm Lock Trilogy PL3000 Bedienerhandbuch PDF herunterladen (Seite 4)

AL-DTM - Data Transfer Module

The enhanced AL-DTM may be used to transfer program data between a PC running DL-Windows

software and locks. Use of the older AL-DTM model 1 is not recommended.

Prox Card Reader/Enroller (AL-PRE)

An AL-PRE is used to quickly enroll multiple ProxCards

and ProxKey

keyfobs into DL-Windows. Use the

supplied 9-pin DB9 to DB9 serial cable to connect the AL-PRE to your computer’s serial COM port. Compatible

with most HID ProxCards

and ProxKey

keyfobs (37 bits or less). For PDL and PL series locks only.

HID

HID CORPORATION

ProxCard

/ ProxKey

Keyfob

Compatible with most HID ProxCards

and ProxKey

keyfobs (37 bits or less).

Note: ProxCard

and ProxKey

are trademarks of

the HID

Corporation.

Double-ended Mini Banana Plug Connector

After you create the program in DL-Windows and transfer the program from your computer to an AL-DTM,

transfer the program from the AL-DTM to the lock(s) via a double-ended mini banana plug. You can also

use this cable to transfer the Lock Program from your lock to an AL-PRE.

DB9 to DB9 Serial Cable

Enroll ProxCards quickly into DL-Windows, then transfer this new ProxCard

data from the computer to

the AL-PRE via this 9-pin DB9 to DB9 serial cable. Once the data is in the AL-PRE, you can transfer the

data to the lock via the double-ended mini banana plug (see above), thus avoiding the need to use an AL-

PCI2 cable for this process.

AL-PCI2 Cable

An ALARM LOCK AL-PCI2 cable is required to communicate between your computer’s RS-232 serial com-

munications port (COM 1-4) and the AL-DTM or lock. One end of the AL-PCI2 cable is designed to be used

on a 9-pin serial Com Port. If your computer has a 25-pin Com Port only, a 25-pin to 9-pin adapter must be

used. The other end of the AL-PCI2 cable features a 2-pin banana plug connector which is polarity sensi-

tive--the TAB (marked “GND”) side must be plugged into the lock’s black (left) terminal.

Supported Products

Infrared Printer (AL-IR1)

An AL-IR1 printer is used to print Audit Trails

without the need for a PC. Its infrared reader

means no cable connection to the lock is

needed.

1 2 3 4 5 6 7 8 9 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Alarm Lock Trilogy PL3000 Bedienerhandbuch Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Alarm Lock Trilogy PL3000