Alarm Lock PL6100 Bedienerhandbuch PDF herunterladen (Seite 7)

given proximity cards, it is convenient to think of each

"location" as a "User", although technically the User

Number is only a location within the Lock Program. It is

easier to say "User 519" rather than "The User in pos-

session of the proximity card that is assigned to the User

Location number 519".

Note: Where a User is located in this list--their User Lo-

cation--is a commonly used description of their User

Number. Because of their similarities, a User Number,

User Location and Location Number can be used inter-

changeably. In some DL-Windows screens, the word

"Slot" is also used. All of these terms are meant to con-

vey the same concept.

With other Trilogy locks that possess keypads, the User

Number defines the Programming Level for that User.

Because the PL6100 does not contain a keypad, all User

Numbers are "Basic Users", meaning each User is in

possession of a proximity card, and that card is either

enabled (allowing entry) or disabled (denying entry).

What is a Group?

With many lock applications, it is convenient for large

numbers of similar Users to be grouped together. All of

these Users might share some common attribute--for ex-

ample, they may all work in the same department of a

company, or may all work the same office hours. Placing

Users into Groups (by assigning them to a specific range

of User Numbers) allows large numbers of Users to be

controlled all at once rather than individually--saving time

and effort. A typical example involves enabling or dis-

abling a Group at a certain time.

Who are Users 297-300?

Proximity cards assigned to User Numbers 297, 298, 299

and 300 have special abilities, as follows:

User 297: Quick Enable User 300

The proximity card assigned to User Number 297 pos-

sesses the unique ability to enable the proximity card

assigned to User Number 300. When proximity card

297 is presented to the lock, proximity card 300 is en-

abled for one time use, allowing passage for one time

only. Once used, User 300's proximity card becomes

disabled.

For example, you wish to allow one-time access to a

temporary worker. Simply present proximity card 297

to the lock and give proximity card 300 to the tempo-

rary worker. Later, when the temporary worker pre-

sents proximity card 300 to the lock, the PL6100

unlocks and allows access for one time only. If the

temporary worker re-presents his card to the lock, ac-

cess will be denied. Later, if you wish to grant the tem-

porary worker access again, simply re-present prox-

imity card 297 to the lock and proximity card 300 will be

re-enabled (again for one time only).

User 298 and User 299: Guard Tour

A Guard Tour Code is used to log the movement of a

security guard as he or she makes rounds from one

assigned guard tour station to the next. Presenting the

User 299 proximity card provides precise verification

and accountability of a guard's movement by logging

the location with a time and date stamp in the Event

Log (Audit Trail).

Note: Proximity cards assigned to User 298 and User

299 are not access cards meaning these proximity

cards do NOT allow the security guard to pass through

the door.

User 300: One-Time-Only Service Card

This is the One-Time Only Service User Card enabled

by the proximity card assigned to User 297. See User

297: Quick Enable User 300 above.

What is DL-Windows?

DL-Windows is a Microsoft Windows-based computer

software program that allows you to program your

PL6100 security lock. You MUST use DL-Windows to

program your lock. With DL-Windows, you can quickly

create Lock Programs (programs that make the lock per-

form its many functions) add multiple Users (who have

access), add ProxCards

and ProxKey

keyfobs, retrieve

event logs, and create Schedules.

The benefit of DL-Windows is that it allows you to set up

all lock programming in advance (on your computer), and

then later send the information to the locks at your con-

venience. For more information, see OI237 and OI352.

Terminology Used in this Manual (cont'd)

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Alarm Lock PL6100 Bedienerhandbuch Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Alarm Lock PL6100