Alarm Lock NETWORXPANEL Spezifikationen PDF herunterladen (Seite 9)

hold : with the series of beeps heard (and re-

lease the button), and no further buttons are

pressed, a short chirp will sound to indicate your 15

second timer expired. Simply repeat the process by

pressing and holding : until the series of beeps

are heard. You can keep repeating this until your

initial 10-minute "startup timer" expires.

Note: Another way to start the 10-minute "startup

timer" is to download firmware to the keypads (see

OI352 for firmware download instructions). In addi-

tion, do not download the same firmware to keypads

with the same "primary" or "secondary" keypad des-

ignations; always make the keypad designation se-

lections first, then download firmware.

ENROLLING WIEGAND SWIPE CARDS

When enrolling Wiegand swipe cards, DL-Windows and

a compatible reader MUST be used; the NETPDK key-

pad cannot "read" Wiegand swipe cards. See SPECIFI-

CATIONS for supported Wiegand reader device mod-

els.

Be aware that the "printed number" or "hot stamped"

number seen on the surface of the card may not be the

same as the "embedded card number" stored within the

card's data stream (DL-Windows requires the

"embedded card number" when enrolling). In addition,

both of these numbers may not be mutually sequential

(cards physically ordered sequentially by their "printed

numbers" may not necessarily have their "embedded

card numbers" also sequential). The "embedded card

number" may be printed on a reference data sheet pro-

vided by the manufacturer. Therefore, the "Sequential

Add" utility (see OI237) may not be used with Wiegand

swipe cards.

The "Facility Code" provided by the manufacturer may

be in either decimal or hexadecimal notation. In addi-

tion, the manufacturer may not indicate the notation

used. A scientific calculator can be used to make the

conversion, if necessary. Note that all entries into DL-

Windows must be in decimal notation.

"High Security Access" (both a card "swipe" input and

User Code input required) may not be used with Wie-

gand devices, unless both are equipped with combina-

tion keypad and proximity reader. See the section

"WIEGAND DATA FORMATS" for supported Wiegand

devices.

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Alarm Lock NETWORXPANEL Spezifikationen Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Alarm Lock NETWORXPANEL