Alarm Lock ETPDLN Bedienerhandbuch PDF herunterladen (Seite 7)

used description of their User Number. Because of their similari-

ties, a User Number, User Location and Location Number can be

used interchangeably. In some DL-Windows screens, the word

"Slot" is also used. They all mean the same thing.

Since User Numbers are fixed, knowing a User Number will spec-

ify the associated Programming Level, and will in turn indicate a

User’s programming abilities. For example, User Number 1 is al-

ways the Master, who can perform all programming tasks.

Programming Levels are hierarchical--higher levels are allowed to

do anything the levels below them can do. For example, if you are

User 2, you are allowed to do anything that Users 3 through 11

can do.

What is a Group?

With many lock applications, it is convenient for large numbers of

similar Users to be grouped together. Placing Users into Groups

(by assigning them specific User Numbers) allows large numbers

of Users to be controlled all at once rather than individually--saving

time and effort. Groups are controlled via schedules, and a typical

example involves enabling or disabling a Group at a certain time.

Default Group associations are specified in the table on page 8.

For example, if you wish to add a User to Group 1, assign this

User a User Number between 51 and 100. These default Group

associations can be changed if needed to allow Groups larger than

the default number of 50 (by using keypad Function 35). (See

page 17 for some Group function examples).

What is DL-Windows?

DL-Windows is a computer program that allows you to program

your ALARM LOCK T3 Security Lock. You do not need DL-

Windows to program your lock, but it makes programming much

faster and easier. With DL-Windows, you can quickly create Lock

Programs (programs that make the lock perform its many func-

tions) add multiple Users (who have access), add proximity cards

and keyfobs, retrieve event logs, and create Schedules. The

benefit of DL-Windows is that it allows you to set up all lock pro-

gramming in advance (on your computer), and then later send the

information to the locks at your convenience.

DL-Windows version 4.0.1 software (or later) allows you to upload

and download programming features wirelessly using the Trilogy

Networx

™

series door locks and a computer network. See OI237

for more information.

How do the Emergency Commands work?

For use with all wireless locks enrolled into the Trilogy Networx

™

radio network, these wireless commands can be sent to all locks

in an Account during a crisis or other urgent situation.

Any User Code can be programmed to allow the use of these

Emergency Commands by simply adding that User Code to an

"emergency function list" within DL-Windows. When an enabled

User Code is pressed at any PDL6500 or ETPDLN keypad, first

the physical lock unlocks, then the lock permits the use of these

emergency commands to be sent to all locks in the network, as

follows:

• ...press 911 to issue "Global Lock Down", to

lock all doors in the Account;

• ...press 000 to issue "Global Passage", to

unlock all doors in the Account;

• ...press 123 to return all locks in the Account

to "normal" (non-emergency) operation.

Note: 3 chirps sound after each emergency command entry.

See the DL-Windows user guide OI352, "Emergency Lock Down"

for more information. Note: DL-Windows does not need to be

running to allow these "Emergency" commands to be initiated;

any wireless lock keypad can be used to disseminate these com-

mands throughout the system.

Who are Users 297-300?

Users assigned to User Numbers 297, 298, 299 and 300 have

special abilities, as follows:

User 297: Quick Enable User 300

User 297 possesses the unique ability to enable the User Code

associated with User 300. User 297 does this by first entering

their own User 297 User Code into the lock keypad. When

User 300 subsequently enters their User 300 User Code, the

lock allows access (for one time) and then the User 300 User

Code becomes disabled.

For example, you wish to allow one-time access to a temporary

worker. Simply enter the User 297 User Code into the lock

keypad. Later, when the temporary worker enters the User

300 User Code into the lock keypad, the User 300 User Code

allows access (for one time only) and then becomes disabled.

Later, if you wish to grant the temporary worker re-access, sim-

ply re-enter the User 297 User Code and the User 300 User

Code will be re-enabled (again for one time only). Note: From

the factory, the User 300 User Code is blank; when the User

300 User Code is added, it is automatically enabled by default.

In addition, each time Features or Users are uploaded to the

lock, the User 300 User Code is re-enabled in ALL the locks in

the Account.

User 298: Reserved

In previous versions of the ALARM LOCK Trilogy series locks,

User Number 298 initiated the sending of data to or from the

lock, and a special "AL-PCI" cable was used to physically con-

nect the lock to a PC running DL-Windows. With the PDL6500

and ETPDLN locks no longer requiring a wired connection,

User Number 298 is also no longer required and has been re-

moved as an active code. Note that the User 298 code does

provide a "Guard Tour" type function (logging the code entry

with a time and date stamp in the Event Log / Audit Trail), but

to ensure compatibility with previous lock model versions, the

use of User 298 is not recommended. Note: User 298 is not

an access code (it is a "non-pass" code) and therefore does

not allow passage through the door. See "User 299: Guard

Tour Code" below.

User 299: Guard Tour Code

A Guard Tour Code is used to log the movement of a security

guard as he or she makes rounds from one assigned guard

tour station to the next. Entering the User 299 code provides

precise verification and accountability of a guard's movement

by logging the location with a time and date stamp in the Event

Log (Audit Trail).

Note: User 299 is not an access code (it is a "non-pass" code)

and therefore does not allow the security guard to pass through

the door.

User 300: One-Time Only Service Code

This is a One-Time Only Service User Code enabled by User

297. For example, User Code 300 is sometimes used for

guard tour duties. See User 297: Quick Enable User 300

above.

Terminology Used in this Manual (cont'd)

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Alarm Lock ETPDLN Bedienerhandbuch Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Alarm Lock ETPDLN